Technical Specification of Solar Tubular Batteries
| Model
|
Capacity at 27 deg C When discharged at(C20 upto 1.75 VPc 1.280) |
Dimension(Kg ± 15%) |
Weight(Kg ± 15%) |
Initial Fresh Charge Minimum AH Input(AH) |
Constant Charge(Amps) |
| Length |
Width |
Height |
Dry |
Filled |
| PPTB 1500 |
150 AH |
500 |
190 |
410 |
31 |
56 |
900 |
10 |
| PPTB 1800 |
180 AH |
505 |
190 |
410 |
32 |
58 |
1200 |
11 |
| PPTB 2000 |
200 AH |
505 |
190 |
410 |
38 |
61 |
1320 |
12 |
| PPTB 2200 |
220 AH |
505 |
190 |
410 |
41 |
64 |
1440 |
13 |
| PPTB 27000 |
250 AH |
505 |
190 |
410 |
47 |
71 |
1500 |
15 |
| PPTB 3000 |
300 AH |
505 |
190 |
410 |
52 |
78 |
1850 |
20 |
Note:The height mentioned is upto terminal top
Power Battery uses premium technology and high grade materials in these lead tubular
batteries to deliver maximum power for extended durations and have an
appreciably longer life span. These batteries are specifically suitable
for powering up UPS and inverters. Power Battery flooded lead acid batteries are
environment-friendly, highly reliable in performance and are low in cost.
Hear again our extensive research and development wing has helped us create
batteries customized to suit Indian operating conditions. These flooded
batteries are perfect for use in battery powered vehicles and to power inverters
as well as for telecom use.
Condition of fully charged
- 3 Consecutive hourly reading of specific gravity and voltage become constant
- Top of charge voltage will be around 16.2V - 16.5V
- All Cells should be gas freely
- Minimum Ah has been given
- Specific Gravity at fully Charged condition 1.240 ± 0.005 at 27 Deg C
Advantages
I Very long life I user friendly I acid volume per ampere hour is 30% more than that off ordinary tubular batteries. it act as coolant and also ensure very low maintenance I suited for use in areas of frequent power cuts I can withstand overcharge better I occupies less floor space, totally new look I less pollution environment friendly I ensure consistent quality
Normal Recharging Instructions
Recharging through Inverter at constant potential mode of 14.2V with limited current as specified. After battery potential reaches 14.4V, the battery should continue in trickle charge mode at constant potential of 13.8V.
Statutory Notice
All batteries contain lead, which is harmful for humans and environment. As per statutory requirements, the used battery must be returned to the authorized dealer, manufacturer or at designated collection centers.
Discharge & Charge Scenario (80%DOD)
- Cycle Method: Discharge with 2I for 4 hours (80% DOD), charge with 2I for 3.5hour + I for 0.5hour 10 10 10 + 0.25I for 3.5hour. This is one cycle
- Residue Capacity determination: The batteries are discharged at 10 hour rate after every 50 cycles to test battery capacity. When residue capacity of 10 hour rate capacity is lower than 80%, test is ended.
- Temperature: 27 Advantage of Upper Constant Current Charge Model Battery can be completely recharged within 8 hours.The end charge voltage will be higher than 2.6Vpc, which is good for active material exchange. Disadvantage of Upper Constant Current Charge Model It has risk of battery malfunction without voltage limited. It isn’ easy to manage charging in practice.
* Technical Parameters are Subject to Change due to Continuous improvements and R&D
• PP-IT2000 is one of the top-quality flagship models of Power Battery Industries. This battery will guarantee superior power backup for your home and is available at an unbelievable price. The battery series have the capability to control deep discharge conditions with short frequencies. It is the #1 choice amongst home UPS systems & online UPS systems as it performs with minimal fumes and gases and has instant switch over function to deliver instant brightness and performance.
• Standard Range
• Tubular Plate Design
• Suitable for Deep Discharge
• 1000 Cycles @ 80% DOD
• Ready for commissioning: Batteries supplied in factory-charged condition ready to be used.
